Differences

This shows you the differences between two versions of the page.

--- neuroelf_gui [2010/06/15 03:42] – correcting the link to image montage UI page jochen
+++ neuroelf_gui [2011/05/18 13:23] (current) – changing vertical resolution to 204 to include bar jochen
@@ Line 7: / Line 7: @@
 ===== GUI layout =====
+{{ youtube>pMY6fvv-Sj4?320x204| NeuroElf - basic browsing}}
 The GUI comes in two modes, full and minimized (whereas minimized removes some UI elements from the figure so as to save some space for other windows).
+\\
+\\
+\\
+\\
+\\
 To bring up the GUI, simply issue the
+\\
 <code matlab>% bring up NeuroElf GUI
 neuroelf_gui</code>
+\\
-call. It will take a couple of seconds (especially if the xfigure class needs to be run-time compiled by Matlab on its first call), after which the following UI figure will appear:
+call. It will take a couple of seconds (especially if the xfigure class needs to be run-time compiled by Matlab on its first call), after which the following UI figure will appear (watch the video on the right hand side, also available in [[NeuroElf basic browsing|full resolution]]):
-{{:neuroelf_gui:main_ui_empty.png?640|NeuroElf Viewer (full mode, no stats)}}
+{{:neuroelf_gui:main_ui_empty_v09c_110512.png?640|NeuroElf Viewer (full mode, no stats)}}
-After loading or creating some statistical map (and, in this case, the Colin brain VMR), the display has more buttons un-grayed:
+After creating some additional files (see [[neuroelf_makefiles]] for more instructions), loading or creating some statistical map (and, in this case, the newly created Colin brain VMR) and using the Clustertable functionality, the display has more buttons un-grayed:
-{{:neuroelf_gui:main_ui.png?640|NeuroElf Viewer (full mode with stats)}}
+{{:neuroelf_gui:main_ui_v09c_110512.png?640|NeuroElf GUI (full mode with stats)}}
 Here is a full-resolution version with numbered areas which are explained below:
-{{:neuroelf_gui:main_ui_areas.png|NeuroElf Viewer (interface areas)}}
+{{:neuroelf_gui:main_ui_panels_v09c_110512.png|NeuroElf GUI (full mode, panels)}}
 The numbered sections in turn mean:
   - dataset selection (among loaded objects)
   - statistical map selection (multi-select capable)
-  - configured clusters/regions of interest and output of cluster table (only for VMP/SMP format at this time)
+  - (a) configured clusters/regions of interest and (b) output of cluster table (only for HDR/HEAD/VMP format at this time) or beta extracts (only for RFX-GLM objects)
   - progress bar area (only visible if a long-running task is executed)
-  - dataset manipulation tools (only HDR/NII/VMR at this time)
+  - drawing tools (only HDR/NII/VMR at this time)
   - view (page) selection buttons and global transformation configuration
+  - contrast/brightness setting (button and slider axis)
   - cursor position in space (TAL/MNI coordinate and BV system coordinate, as well as volume selector)
   - configuration of statistical map (only VMP format at this time)
@@ Line 42: / Line 51: @@
     * c) axial/transversal view
-==== Dataset selection ====
+==== Dataset selection (1) ====
 The dropdown controls allow to select any of the loaded datasets as the currently active dataset (both for anatomical and statistical datasets). Currently supported are
   * as anatomical datasets
@@ Line 48: / Line 57: @@
     * HDR/NII (Analyze/NIftI format, incl. 4D NIftI files)
     * HEAD (AFNI's BRIK/HEAD format, anatomical auto-detect)
+    * MSK (BrainVoyager's Mask format)
     * VMR (BrainVoyager's Volumetric MR format)
     * VTC (BrainVoyager's Volumetric TimeCourse format)
   * as statistical datasets
+    * CMP (BrainVoyager's Component Map format)
     * GLM (BrainVoyager's General Linear Model format)
+    * HDR/NII (Analyze/NIftI format, requires special tokens in description or settings in ''RunTimeVars'')
     * HEAD (AFNI's BRIK/HEAD format, statistical auto-detect)
     * VMP (BrainVoyager's Volumentic Map format)
-Please note: Statistical maps from SPM must currently be imported into BrainVoyager's VMP format for thresholded map display!
 In addition to the selection, for each dataset a transformation quaternion (origin) can be set separately, in case datasets from different programs are not initially compatible (3D transformation button). Once a dataset is no longer required in the list, it can be removed from the dropdown (using the x-button).
-==== Statistical map selection ====
+==== Statistical map selection (2) ====
 Once an object is loaded suitable for statistical map overlay, the maps therein can be displayed, also supporting a multi-selection of maps. Additionally, the following actions are supported:
   * moving maps within their container (HEAD and VMP format, arrow up and down buttons)
@@ Line 65: / Line 75: @@
   * deleting maps from their container (HEAD and VMP format, trashcan button)
   * computing a formula on the available map data (VMP format only, //f//-button, see [[vmp.ComputeFormula]] for more info)
+  * sampling the selected maps as surface maps (SMP) for the currently visible surfaces (SRF objects selected in Scenery listbox)
   * propagating the map condition selection for other subjects (GLM format, ellipse-button)
-==== Configured clusters and table output ====
+==== Configured clusters and table output (3a/3b) ====
 Below the map area is the listbox that contains the currently configured clusters (comparable to BrainVoyager's ROI dialog). Each time the Clustertable button in the stats area is used, the clusters will be overwritten, so **make sure to save any desired/altered list of clusters** before using the Clustertable function again!
@@ Line 85: / Line 96: @@
   * a table of extracted betas (also showing each subject's name and the label of the cluster from which the data was drawn)
-==== Progress bar ====
+==== Progress bar (4) ====
 For some longer-running tasks (e.g. alphasim or robust regression of contrasts), a progress bar is shown and updated regularly. This allows the UI to remain mostly function (browsing, shorter tasks) while a longer task is completing in the back-ground.
-==== Dataset manipulation buttons ====
+==== Dataset manipulation buttons (5) ====
 From top to bottom, these buttons are associated with the following actions/settings:
   * browsing mode (drawing disabled)
@@ Line 95: / Line 106: @@
   * floodfill (3D flood-filling of voxels that match the selected criteria)
   * marker expansion (expanding the marked selection in a dilation fassion)
+  * smoothing of the gray-scale data (allowing a coordinate and value range selection, as well as setting a smoothing kernel)
   * smoothing (the marked selection is smoothed to remove rough edges)
   * undo drawing en/disable (drawing takes back values from the buffer)
@@ Line 102: / Line 114: @@
   * reload marked (reload dataset from disk and mask with marked color)
   * reload unmarked (reload dataset from disk and inverse-mask with marked color)
+  * defining a new ROI (cluster) to be added to the list of clusters (VOI list)
+  * setting the underlay object
-==== View / Page selection ====
+==== View / Page selection (6) ====
 The main UI has three different views:
@@ Line 110: / Line 124: @@
 The view/page selection buttons, from top to bottom, mean:
   * undocking (create a secondary, satellite figure containing the current view, allowing to investigate multiple maps/datasets, potentially at the same coordinate via linked browsing)
+  * toggle between linked and linked browsing (state obversable)
+  * minimize/maximize window
   * switch to three-slice view (page 1, default on startup)
   * switch to sagittal-zoomed view (page 2, SAG)
@@ Line 116: / Line 132: @@
   * set global spatial transformation parameters (in case data comes from a different program)
   * switch to surface rendering view (page 3)
-  * minimize/maximize window
+  * invoke voxel-based rendering dialog
-Upon clicking this last, bottom-most button, the window will convert to minimized view (if it is in full mode, that is):
+==== Minimized mode ====
+Upon clicking the third button (which will be replaced with a different version), the window will convert to minimized view (if it is in full mode, that is):
-{{:neuroelf_viewer_mini.png|NeuroElf Viewer (minimized)}}
+{{:neuroelf_gui:neuroelf_gui_minimized_v09c_110512.png|NeuroElf GUI (minimized)}}
-The elements on the left side of the figure (file/map selector, cluster and table output) will be hidden from view to free up some space for other windows. The following 5 sections remain:
+The elements on the left side of the figure (file/map selector, cluster and table output) will be hidden from view to free up some space for other windows. The following sections remain:
   - sagittal view
   - coronal view
   - axial/transversal view
+  - drawing tools
+  - view/page selector
+  - contrast/brightness slider (and settings button)
   - current position
   - statistics configuration
+  - progress bar area
-==== Cursor position in space ====
+==== Contrast/brightness setting (7) ====
-The six spatial coordinate edit fields show and allow to set the current position (cursor/crosshair) in either TAL/MNI spatial convention (coordinate origin is the center of each slice at coordinate [0, 0, 0]) or BrainVoyager convention (coordinate origin is located in the upper, frontal and right "corner", so that the TAL-based center is at BV coordinate [128, 128, 128]). Currently only integer coordinates are supported (but the zoomed view allows for interpolated/non-integer coordinates to be shown of course).
+It is now possible to change the contrast and brightness of a voxel-based anatomical object (FMR, HDR, HEAD, VMR) without changing the underlying data. To do so, you can click the **C/B** button, which allows the user to set the minimum value (black) and maximum value (white) for the scaling function, as well as the possible minimum and maximum value (slider range).
+Alternatively, you can click into the slider containing a (vertically aligned) histogram of all non-0 voxels of the dataset. When clicked closer to the maximum slider, the maximum can will be reset to the clicked position (which also works while the mouse button is held down to fine-tune the selection), and when the click occurs closer to the lower slider, the minimum is re-set.
+==== Cursor position in space (8) ====
+The six spatial coordinate edit fields show and allow to set the current position (cursor/crosshair) in either TAL/MNI spatial convention (coordinate origin is the center of each slice at coordinate [0, 0, 0]) or the actual sampling coordinate of the dataset (coordinate origin for BrainVoyager objects is located in the upper, frontal and right "corner", so that the TAL-based center for a full-space VMR dataset is at BV coordinate [129, 129, 129]). Currently only integer coordinates are supported for input (but the zoomed view allows for interpolated/non-integer coordinates to be shown of course).
 Additionally, for four-dimensional datasets, a volume selector and edit field allows to change the currently shown volume.
-==== Configuration of statistical maps ====
+==== Configuration of statistical maps (9) ====
 The first row of controls allows to set minimum and maximum thresholds for coloring the statistical map (any value below the minimum will not be shown, values above the maximum will be shown in the color of the maximum), and if the type and degrees of freedom of a statistical map is well-configured, one of the pre-defined probability threshold values can be selected as well (which automatically honors the number of tails selected below for one- or two-tailed statistical thresholding).
-In the second row, the positive and negative tails of the configured map can be en- and disabled separately, and also the cluster size threshold can be set and dis/enabled.
+In the second row, the positive and negative tails of the configured map can be en- and disabled separately, and also the cluster size threshold can be set and dis/enabled. **Note: whenever the cluster size thresholding is enabled, the values of the map will be set to zero for all non-clustered areas, which then is reflected in the ''Sampled values'' box!**
 The further controls are
-  * the ''alphasim p<.05'' button uses the current map as a template (values non-equal to zero) and runs alphasim with that template as a mask (using the correct spatial resolution) to determine the required cluster size threshold for the more typical uncorrected p-thresholds (results printed in the Matlab console window).
+  * the ''alphasim p<.05'' button uses the current map as a template (values non-equal to zero) and runs alphasim with that template as a mask (using the correct spatial resolution) to determine the required cluster size threshold for the more typical uncorrected p-thresholds (results printed in the Matlab console window)
-  * the ''Clustertable'' button will call the [[vmp.ClusterTable]] method for the currently select map (only for single map selection) and update the configured clusters list as well as the table output field. The checkbox right of the button dis/enables the splitting of larger clusters into sub-clusters, for which the peaks will be reported separately if enabled.
+  * the ''Clustertable'' button will call the [[vmp.ClusterTable]] method for the currently select map (only for single map selection) and update the configured clusters list as well as the table output field. The checkbox right of the button dis/enables the splitting of larger clusters into sub-clusters, for which the peaks will be reported separately if enabled; optional setting for the Clustertable output can be set via the **File -> Options -> Clustertable** sub-menu
-  * the ''MNI2TAL'' checkbox controls whether, for any created cluster table, coordinates are converted from MNI into TAL space/convention (by applying the ''mni2tal.m'' function written by M. Brett).
+  * the ''icbm2tal'' checkbox controls whether, for any created cluster table, coordinates are converted from ICBM into TAL space/convention (by applying the [[icbm2tal]] function)
   * the ''TDclient'' checkbox controls whether, for any created cluster table, coordinates are passed on to tdclient, so that for each peak the nearest gray-matter label is looked up
   * the ''Interpolate'' checkbox controls whether statistical maps are interpolated into the spatial resolution of the UI (1x1x1 mm) or sampled with nearest-neighbor sampling
@@ Line 148: / Line 174: @@
   * if the color coding is set to RGB, the colors for positive and negative minimum and maximum values (thresholds) can be configured using the four colored buttons
-==== Output of values ====
+==== Output of values (10) ====
 This box simply contains the sampled value at the current (cursor/crosshair) position, both for the selected anatomical and any selected statistical map.
-==== Time course display ====
+==== Time course display (11) ====
 For four-dimension datasets, this area displays the time course at the current (cursor/crosshair) position. A click into the timecourse will also set the volume selector to that position (which works more interactively than using the volume slider, as this requires the mouse button to be released!)
 {{:neuroelf_gui:main_ui_with_timecourse.png?640|Main UI window with VTC and time course}}
-==== Slice display ====
+==== Slice display (12a/b/c) ====
 In both the three-slices view and the zoomed one-slice view, any click into one of the slices will set the cursor to the clicked position within the slice. This allows for relatively simply browsing of the dataset. The position will keep updating while the mouse button remains pressed (and the mouse moved).
 To reset the slice display to its original position (central coordinate), press the ''r'' key on the keyboard.
-==== Surface display ====
+==== Surface display (12) ====
 For the surface display, the following viewpoint modifications are supported with the mouse (while the mouse button is pressed within the surface area and remains pressed throughout the mouse motion):
   * without any modifier key pressed, the view will rotate (along the Z axes for left/right mouse movement -> longitude/azimuth, and along a perpendicular spatial axis -> latitude/zenith)
@@ Line 194: / Line 220: @@
   * ''2'' key: toggle negative statistical tail on/off
-===== File menu =====
+===== Menus =====
-The ''File'' menu allows to load any xff-supported object, but only those displayable by the GUI will be added to the lists of selectable objects (FMR, HDR/NII, HEAD, SMP, SRF, VMP, VMR, VTC)
+For a list of menu items, please continue to the [[neuroelf_gui - menu tree|menu tree]] page.
-Additionally, any file loaded via the GUI will (if appropriate) be added to the list of recently loaded objects, so that in an upcoming session, formerly loaded files can be easily re-loaded.
-Under the ''Options'' submenu, the following entries are available:
-  * Stats colors (LUT)
-    * a list of files bundled with NeuroElf to alter the colortable for statistical maps
-  * Edit LUT palette - this calls up ''colorpicker'' for the currently selected LUT object
-  * Linked browsing -  if several voxel-views (at least one satellite figure with an anatomical dataset) is open, this will set the coordinate in all open windows upon clicking into any of those figures
-  * Echo function call/methods - if checked, this will cause NeuroElf GUI to print a line of code into the Matlab prompt window that can be used as a template for writing your own scripts
-===== Analysis menu =====
-Currently this menu has only one working entry:
-  * Contrast manager - this will bring up the [[NeuroElf GUI - contrast manager|Contrast manager UI]]
-===== Visualization menu =====
-Currently this menu has only one entry:
-  * Create montage images - this will bring up the [[NeuroElf GUI - image montage UI|Image montage UI]]
-===== Tools menu =====
-The tools menu gives access to the following actions:
-  * SPM to BV conversion
-    * SPM.mat to PRT conversion ([[spmmat2prt]])
-    * SPM.mat to SDM conversion ([[spmmat2sdm]])
-  * [[alphasim]]
-  * [[renamedicom|Rename DICOM files]]
-  * [[spm5_preprojobs|SPM5/8 Preprocessing configuration]]
-  * [[tdclient]]
-  * Quality assessment
-    * [[fmriquality|fMRI quality assessment]]
-    * [[showspmrparams|Show SPM motion parameters]]